What is the best render for a house in London?
For most London houses we recommend a through coloured silicone or monocouche render on a basecoat with mesh. Silicone suits painted or older walls and stays cleanest. Monocouche suits sound brick and block and is quick to apply. Lime is the right choice for listed buildings and very soft old masonry.
The right choice starts with the wall itself. At the survey we tap test the surface, look for old paint, cracks and damp staining, and check whether the house is solid brick or cavity wall. Painted brick and older render usually point us to a primer, PRB Renomur or EWI Pro basecoat with mesh and a silicone finish. Sound brick, block and new build walls suit PRB monocouche, often over a basecoat or Accrofix Pate on existing masonry. Lime comes in on listed or very soft walls, though most 1930s solid brick houses do well with a breathable modern system. The setting matters too, because a busy road or heavy tree cover favours the cleaner silicone surface. We bring texture and colour samples to the survey and can show your house in two render colours from a photo, so the decision is made on evidence.
What is silicone render?
Silicone render is a thin coat, through coloured render, about 1.5mm thick, containing silicone resin. It goes over a basecoat with mesh. Rain beads off the surface while water vapour can still escape, so walls stay cleaner for longer and can breathe. It is the most popular modern finish for refurbishments and external wall insulation.
On site, a silicone system goes on in layers. The wall is cleaned and any loose material scraped back, then a basecoat of about 8mm is trowelled on with glass fibre mesh pressed into it. Once that has cured, a primer goes on, followed by the silicone finish, applied at roughly the thickness of its grain and floated to an even texture. The resin makes rain bead and run off, so dirt and algae have less to cling to, which is why it stays cleaner on north facing walls and under trees. Because it is thin, it relies on the basecoat for strength, so ask any installer what basecoat and mesh sit underneath. Colour is mixed at the factory, and we order each wall from matching batches. Later on, avoid harsh pressure washing and use a soft brush and a gentle rinse instead.
What is monocouche render?
Monocouche means "one coat". It is a through coloured, cement based render applied 15 to 20mm thick in two passes, by spray or by hand, then scraped to a lightly textured finish. It never needs painting. We use PRB monocouche, usually over a basecoat with mesh on existing walls to control cracking.
Glass fibre mesh is embedded in the first of the two passes, and the second pass builds the render up to its full thickness. Once the render has firmed up, it is scraped back with a toothed tool to open the texture and take off the surface laitance, leaving the familiar lightly textured face. On existing brick we often bond and level with PRB Accrofix Pate first, which evens out suction so the colour cures consistently. We do not use metal lath with PRB monocouche. Timing matters more than with most renders, because a wall scraped too early or too late shows patchy texture, so each elevation is finished in one go to a corner or bead. A light white bloom can appear on a new wall and normally weathers away. Ask to see a scraped sample at the survey so you know the texture you are getting.
Silicone or monocouche: which is better?
Neither is better everywhere. Silicone is thinner, more flexible and more water repellent, and it stays cleaner, so we use it over painted brick and on insulation. Monocouche is thicker and harder, ideal for sound brick and new build, and usually slightly cheaper per m². We recommend one after seeing your wall.
The decision usually comes down to the background, the look you want and the long term upkeep. Over painted brick or old render, silicone on a meshed basecoat bonds well without stripping, and its flexibility copes better with an older wall that moves a little. On insulation boards, a thin coat silicone system is the normal finish. On new blockwork or clean brick, monocouche gives a hard, thick surface that resists knocks, which suits side passages and walls near bins and bikes. Silicone gives a finer, more even grain, while monocouche has a scraped, slightly rougher texture. Both are through coloured, and both carry our 10 year warranty when installed as a full PRB or EWI Pro system. Under trees or on a shaded elevation, silicone tends to stay cleaner for longer.
Is sand and cement render still a good option?
It still works, but we rarely recommend it for houses now. Traditional sand and cement render needs painting every 5 to 10 years, cracks more easily and can trap moisture in old solid brick. Modern through coloured systems cost a little more at the start but save you the repainting.
Traditional sand and cement render is mixed on site and applied as a scratch coat and a top coat, then painted once it has fully cured. Mixing on site means strength and colour vary from batch to batch, and the hard, rigid finish tends to crack when an old wall moves or when frost works into hairline gaps. Water expands by about 9% when it freezes, so every winter opens those cracks a little further. On solid brick, cement can hold moisture behind it, which shows up later as damp patches and blown areas. It still has a place on garden walls, plinths and small repairs where a painted finish is wanted. If your house already has sand and cement render in good order, it can usually be cleaned, primed and overcoated with a meshed basecoat and a silicone finish, which saves the cost and mess of hacking it off.
What is acrylic render?
Acrylic render is a thin coat, through coloured render made with acrylic resin. It is flexible and comes in many colours, but it is less water repellent than silicone and picks up more dirt. On houses, silicone and silicone enhanced finishes have largely replaced it.
Acrylic finishes became popular because they are easy to apply and come in strong colours. The resin forms a tougher skin that is less open to vapour than silicone, so on a wall that needs to dry out, moisture can sit behind it for longer. The surface also holds more dirt and grows algae more readily on shaded, damp elevations, which is why many older acrylic houses look streaky after some years. We install silicone finishes within the PRB and EWI Pro systems, so we do not fit plain acrylic on homes. If your house already has acrylic render that is sound, it can usually be treated with a biocide where there is algae, rinsed at low pressure, primed and overcoated with a meshed basecoat and silicone finish.
What render finishes can I choose from?
The main choices are a smooth or fine grain thin coat (silicone, 1 to 1.5mm grain), a scraped texture (monocouche), a smooth sponged finish (lime or sand and cement), and traditional finishes such as roughcast and lined ashlar. We bring samples to the survey so you can see and feel the texture before choosing.
Each finish suits a different style of house. A fine grain silicone gives a clean modern face that works on 1930s semis and new extensions, while a slightly coarser grain hides small undulations on an uneven old wall. Monocouche gives a scraped texture with a soft, stone like look. Sponged lime or sand and cement suits period houses and matches neighbouring stucco, and on Victorian and Georgian fronts we can cut lines into lime to imitate ashlar blocks. Texture also affects upkeep, because a smoother face sheds dirt more easily while a rough one hides marks. Colour looks lighter on a large wall than on a small sample, so we can show your house in two render colours from a photo before you decide. If you live in a conservation area, check whether the council expects a particular finish.
What does through coloured render mean?
The colour is mixed into the render itself rather than painted on top. If the surface is scuffed, the colour underneath is the same, and the wall never needs repainting. Monocouche, silicone and acrylic renders are all through coloured.
With painted render, the colour is a film a fraction of a millimetre thick, and once it chips, fades or flakes the wall needs redecorating. Through coloured render has pigment all the way through, so knocks and scuffs show far less and small repairs blend in better. Colour is set at the factory, so we order enough from matching batches for each elevation and finish each wall in one go, which avoids visible joins. Very dark colours absorb more heat and can fade a little in strong sun, so most systems limit how dark a finish can be on a sunny elevation. Through coloured render can still be painted later with a compatible silicone or mineral paint if you change your mind about the colour. Ask for a sample panel or a colour mock up from a photo, because the same colour reads differently across a whole wall.
Do I need a basecoat and mesh?
On existing walls, yes. A basecoat with glass fibre mesh embedded in it spreads stress across the wall, so small movements in the brickwork don't crack the finish. It is the biggest single difference between a render that lasts for decades and one that cracks within a few years.
Old London walls move with the seasons, and they often mix brick, patched cement, lintels and blockwork from past alterations. Each material expands and absorbs water differently, so a finish applied straight onto it tends to crack along the joins. The basecoat is trowelled on at about 8mm, the glass fibre mesh is pressed into its outer part with overlapping joins, and the basecoat is smoothed over so no mesh shows. We add diagonal mesh patches at the corners of windows and doors, where cracks usually start. On new blockwork, monocouche can sometimes go straight on, but where different materials meet we still add a meshed basecoat. When comparing quotes, ask each contractor whether mesh covers the whole wall or only the cracks, because patch meshing leaves weak lines at its edges that often show as new cracks later.
What is spray render?
Spray render is render applied by machine rather than by hand trowel. On larger walls it gives a more even thickness and finish and can shorten time on site. We spray monocouche and some basecoats, then finish corners, reveals and details by hand.
Spraying uses a render pump that mixes the material and delivers it through a hose to a gun, so a wide wall can be covered evenly in one session. That matters with through coloured renders, because a wall finished in one continuous session cures to a more consistent shade. On a typical London house, spraying suits the large flank and rear walls, while front elevations with bays, sills and mouldings still need careful hand work. Before spraying, windows, doors, roof edges, paths and neighbouring walls are masked and sheeted, because overspray is hard to remove once it sets. Spraying needs calm weather, since wind carries spray and dries the surface too fast. Hand applied render can achieve an equally good result, and the system, the mesh and the preparation matter more than the method. Ask how your contractor will protect the surroundings before work starts.