How much does rendering cost per m² in London in 2026?
As a guide, a full modern render system, meaning a basecoat with mesh and a silicone or monocouche finish, costs about £75 to £110 per m² plus VAT in London. Scaffold, hacking off old render and repairs are extra. We give a fixed written price after a survey.
That range covers the core system on a prepared wall, meaning primer or bonding coat, basecoat with glass fibre mesh, beads at corners and edges, and the through coloured finish. The lower end is typical of large plain walls with easy access, and the upper end applies to walls broken up by bays, reveals, sills and pipes, where most of the time goes into detailing. On top come scaffold, usually £1,500 to £3,500 for a semi, hacking off failing render at £25 to £40 per m², and a levelling coat at about £25 per m² where the wall has been stripped. Ordinary rendering carries 20% VAT. We measure each elevation at the survey and itemise the price so you can see what each part costs. Send photos of every elevation and we will return a written quote within 24 hours, then confirm a fixed written price after the free survey.
How much does it cost to render a 3 bed semi in London?
Typically £10,000 to £16,000 plus VAT for all elevations, including scaffold. The price depends on the wall area (usually 100 to 130m² gross), whether old render must come off, access, and details such as bay windows. External wall insulation on the same house costs around £20,000 to £26,000.
Most of the difference between a £10,000 and a £16,000 job comes from the existing surface. A semi with sound painted render can usually be primed and overcoated, while one with loose pebbledash or hollow cement render needs hacking off and a levelling coat first, which adds cost and time. Bay windows, porches, side passages and extended rear walls add detailing, and access over a neighbour's garage or conservatory can make the scaffold more involved. Fixtures such as satellite dishes, alarm boxes, lights and downpipes need taking off and refitting, and gas or soil pipes may need extending to clear the new thickness. Our price includes scaffold and waste removal by skip or a load and go service. If you are weighing up insulation, ask us to price both options side by side, because much of the scaffold and preparation cost is shared between them.
How much does it cost to render the front of a terraced house?
Usually £6,000 to £9,000 plus VAT for a typical London terrace front of 30 to 40m², including scaffold. Period details, a pavement scaffold licence or hanging tiles to remove can add to the cost.
A terrace front is smaller, but it is often the most involved elevation on the house. Scaffold usually stands on the pavement, so it needs a council licence, and in some boroughs a parking bay suspension for deliveries and the skip, or a load and go waste service where there is no space. Period details such as sills, keystones, window surrounds and decorative bands take time to bead or form by hand. Hanging tiles or old timber cladding at first floor level have to be stripped and the background prepared before rendering. We also take care where your render meets the neighbours' brickwork, finishing to a clean stop bead so the joint looks deliberate and stays weathertight. Check whether your street lies in a conservation area, as that can affect the finish and colour you are allowed. We arrange the scaffold licence as part of our price.
How much does it cost to remove old render?
Hacking off old render and taking it away adds roughly £25 to £40 per m² plus VAT. The bare wall then needs a levelling coat, at around £25 per m², before the new system goes on. We only hack off the areas that are failing.
Before pricing removal, we tap test the render across each elevation and mark hollow areas, cracks and bulges, so you only pay to remove what has failed. Removal is done with a breaker on hard cement, or by hammer and bolster on soft bricks where a heavy tool would damage the face. Some brick face damage is normal and is covered by the levelling coat. Waste is heavy, so it goes out by skip or a load and go service, both included in our price. Once the wall is bare, it is primed and levelled with PRB SC Gris before the new system goes on. Stripping a wall back to brick can bring in the building regulations insulation requirement if it covers more than half of a wall or more than a quarter of the whole outer surface, so we talk that through with you at the survey.
How much does scaffolding cost for a render job?
In London, scaffold for a typical semi usually costs £1,500 to £3,500 for the length of a render job, and more for three storeys or difficult access. Scaffold on the pavement also needs a council licence, which adds fees and time. We arrange scaffold as part of our price.
Scaffold is designed around the house, so height, roof shape, conservatories, extensions and neighbouring buildings all affect the cost. On a render job it needs working lifts close to the wall with enough clearance to apply and finish the render, and it is often sheeted in hot, windy or wet weather to protect fresh work. Where scaffold or a skip stands on the pavement, the council issues a licence, often with conditions on lighting, signage and hoarding. Applications take time, so we submit them as soon as a start date is agreed. Scaffold is hired for the length of the job, so a well planned programme with the right weather window keeps it standing no longer than needed. If a neighbour's garden or roof is needed for access, a friendly word from you early on helps. Ask any renderer whether scaffold is in the price or added later.
How much does external wall insulation cost?
Around £200 to £260 per m² plus any VAT for a complete EWI system with a render finish, including insulated reveals and plinth detailing. For a typical 3 bed semi that is about £20,000 to £26,000. See the VAT question below, as insulation can currently be zero rated.
An EWI system is thicker and more involved than a render job, which explains the price. Insulation boards, typically 90 to 100mm on a solid brick wall, are fixed with adhesive and mechanical fixings, then covered with a meshed basecoat and a silicone finish. Every window and door reveal is insulated and beaded, sills are replaced with deeper ones to suit the new wall line, and the plinth is detailed above the damp proof course. Gas meters, downpipes, soil stacks, lights and alarm boxes all have to be moved out, and roof edges may need extending so the eaves still overhang the new wall. Insulation installed in homes is zero rated for VAT until 31 March 2027. Ask about funding early, because ECO4 closes on 31 December 2026, the Great British Insulation Scheme has already closed, and the Warm Homes Plan follows from 2027.
Is rendering a house worth the money?
For a tired, cracked or pebbledashed house, it usually is. A good render system transforms kerb appeal, protects the wall and lasts 25 years or more with very little upkeep. Adding insulation at the same time also cuts the heat lost through solid walls.
Value comes from how the house looks, how well the wall is protected and how little upkeep it needs afterwards. A through coloured system removes the cycle of repainting that sand and cement or painted pebbledash demands, and a meshed basecoat resists the cracking that lets rain into the brick. An uninsulated solid brick wall about 230mm thick has a U value of about 2.0 W/m²K, and 90 to 100mm of insulation brings it close to the 0.30 W/m²K target for upgraded walls, so rooms feel warmer and lose less heat. Rendering is less worthwhile when the brickwork is sound and attractive, or when an underlying problem such as a leak or ground movement has not been fixed. Ask what the warranty covers, since a 10 year product and workmanship warranty backed by the manufacturer system protects what you have spent.
What affects the price of rendering?
The main factors are wall area, scaffold height and access, the condition of the existing surface, the system chosen, and the detailing around windows, bays and mouldings. Practical points such as pavement licences, parking and space for a skip also make a difference.
Wall area sets the baseline, but detail often matters more than size. A plain flank wall goes quickly, while a front with a bay, porch, arched windows and string courses can take as long as the rest of the house. Condition drives the preparation, from simple cleaning and priming to hacking off and a levelling coat at about £25 per m². The system matters too, with EWI costing more than render alone. Access affects both scaffold and labour, for example a mid terrace where every bag and tool comes through the house, a conservatory to bridge, or three storeys at the front. In London, pavement licences, parking suspensions, controlled parking zones and waste removal all add cost and planning. We itemise each of these on our quote, so when you compare prices you can see exactly where the money goes.
Why do render quotes vary so much?
Quotes are often not for the same job. A cheaper price may leave out mesh, beads, scaffold, hacking off, making good or a manufacturer warranty. Ask every renderer exactly which system and layers they will use, and what guarantee comes with it.
Two quotes for the same house can describe very different jobs. One may price a full meshed basecoat across every wall, while another meshes only around cracks. One may include corner, stop and bell cast beads, primer, sills and making good around windows, while another leaves those as extras. Scaffold, pavement licences, waste removal and moving pipes or cables are common gaps. The products matter as well, since a manufacturer system is designed and tested to work together and carries a warranty, while a mix of products from different brands usually does not. Ask each contractor to name the system, list every layer with its thickness, confirm whether hacking off is included, and set out the payment terms. A fair contractor takes a deposit and stage payments and never asks for full payment upfront. Put the quotes side by side on those points before comparing totals.
Is VAT charged on rendering?
Rendering a home is charged at the standard 20% VAT. Installing wall insulation in a home is currently zero rated under HMRC's energy saving materials relief, which runs until 31 March 2027 and can apply to external wall insulation. We show the VAT treatment clearly on every quote.
The relief covers installing qualifying energy saving materials in homes, which includes insulation on external walls, so on an EWI job the boards, fixings and the render that forms part of the insulation system are normally treated as one zero rated installation. A render job with no insulation stays at 20%. Where a project has both, for example EWI on the rear and side walls and render only on the front, we split the quote so each part shows its own VAT treatment. Works that go beyond the insulation, such as unrelated repairs or decoration, stay standard rated. The relief is set to end on 31 March 2027, so the timing of the work matters if you are planning EWI. If you are unsure whether your project qualifies, ask your accountant or read the HMRC guidance, and we will show the treatment line by line on the quote.